Ich habe mir jetzt auch mal ein #Pedalboard für den #Bass geholt und zusammengestellt. Mein #Verzerrer (#Darkglass AO) und ein neuer #Compressor (Joyo Scylla) sind drauf.

Hauptgrund war tatsächlich, dass der Darkglass keine Batterie hat und ich keinen Bock auf noch mehr Kabel hatte.. Deshalb lag die Zerre ewig rum, obwohl sie nicht ganz günstig war. Also hat mein neues Pedalboard jetzt einen großen Akku drunter geschnallt.

Damit es nicht so leer ist, habe ich mir noch einen recht günstigen #Compressor geholt. Das ist das erste Mal, dass ich so einen nutze, aber YT wies mich recht deutlich darauf hin, dass man so einen durchaus haben will als Basser..
Und in der Tat: Der Unterschied ist nicht riesig, aber doch gut hörbar. Sehr angenehmer gleichmäßiger Sound!

Eine #Frage an die Pedalboard Bauer hier: Compressor vor oder nach der Zerre einstöpseln? Meinungen? So weit ich verstanden habe:

* Wenn nach der Zerre, dann würde er potentielles "Leerrauschen" des Verzerrers anheben, wie jeden leiseren Sound.
* Wenn vor der Zerre, verliert man die Dynamik des Verzerrers, der ja auf unterschiedlich starke Anschläge reagiert.

Ersteres scheint bei mir Null Problem zu sein, deshalb ist der Compressor bei mir jetzt hinter dem Verzerrer.

Wie auch immer: Der Darkglass ist einfach der Hammer. Ich habe seit dem ständig zwischendurch den Bass in der Hand und spiele, weil das üben mit dem Sound einfach total Bock macht!

Desktop #pedalboard #eventidespace #strymoniridium #diamondcompressor #calinepuresky #RMEBabyFaceProFS #pedalboardoftheday #knowyourtone #reverb #ambientguitar

Latest configuration. Some new. Some rehoused. Some reordered. #guitar #GearSquad #pedalboard

The bedroom pedalboard. #pedals #guitar #music #pedalboard. I'm running these into a orange micro terror into a ppc108 orange cab with an 8inch speaker. The cab lacks bottom end but it's still fun to play. The micro terror is ridiculously loud... What pedals are you running and into what amp?

Pedalboard Wednesday. Found that various other overdrives weren’t as tonally satisfying or versatile as the Wampler Triumph at 18v, so back on the board it goes. But this time with a little makeover so I don’t see the word ‘Trump’ every time I look at it #pedalboard #wampler #jhs #thatpedalshow

ARCHIVE - IYE2023

THE FUZZTONES live a POGGIBONSI (Si)
THE FUZZTONES live: Sul palco i Fuzztones, gruppo storico garage rock statunitense, il cui nome è stato ispirato dall'effetto di distorsione fuzz tone appunto, inventato nel 1962 e che sentiamo sempre in Satisfaction dei Rolling Stones.

https://www.iyezine.com/the-fuzztones-live-a-poggibonsi-si?utm_source=dlvr.it&utm_medium=mastodon

ARCHIVE - IYE2023

THE FUZZTONES live a POGGIBONSI (Si)
THE FUZZTONES live: Sul palco i Fuzztones, gruppo storico garage rock statunitense, il cui nome è stato ispirato dall'effetto di distorsione fuzz tone appunto, inventato nel 1962 e che sentiamo sempre in Satisfaction dei Rolling Stones.

https://www.iyezine.com/the-fuzztones-live-a-poggibonsi-si?utm_source=dlvr.it&utm_medium=mastodon

Here's an early stage of an early #DIY -#pedalboard- err, portable desk top? for the #TwistedElectrons #drumMachine and #synthesizers.

Not yet included is the TherapSID as the sound chips are not installed. lol. One day I'll buy the final revision and add it to a real board.

Outside the frame is the #OXIinstruments One #sequencer. That came with a nice case so, I'll leave it in there for now.

Again, I need a better power solution. I need more gear altogether! lol

Mon pedalboard....
2 boucles activées par un Switch Blade Pro de chez EH (A+B en parallèle).
La première: DinaComp (MXR), Mastotron (ZVex), Black Oath (Genre Hizumitas modifiée par mes soins, pour basse).
La deuxième: Cthulhu Naflfhtagn (Genre Plume modifiée par mes soins, pour basse), Bass Synth (Digitech), BlueBox C11 mod (MXR), Bass Multi Chorus (Digitech)
Bon courage à notre guitariste...
#bass #LaHorde
#pedalboard
#the_black_druid_effects
#stonermetal #stoner #stonerrock #doommetal

https://metsn.tumblr.com/post/775040316000567296

METSÄÄN - OURBOROS AUTOPOIESIS - extreme EFX chain feedback looper

A feedback looper that squeezes the extreme out of your EFX-chain. Perfect for 'Tone scouts', sound-designers and those who like harsh noises. An extended version of the Death by Audio - Total Sonic Annihilation 2 pedal, the METSÄÄN version has a 3 stage MODE selector that switched between 'vanilla'/ORIGINAL and boosted HIGHS or LOWS, which exponentially enhances the sonic possibilities of the original pedal and allows for dynamic frequency shifts in a harsh noise live performance, for example. But this pedal is not just god for harsh noises, but also for subtle tone experimentation, imagine a sound modulator like a delay or tremolo modulating itself in a loop. wonderful textures and abstract saturation might occur. Sometimes, you might get not much out of it and with other set-ups a plethora of unexpected sonic gems. With some EFX chain set-ups an input signal is not needed, as you can generate no-input noise scapes. A experimental sound artist's treasure trove/ pandorra's box. This feedback looper enables you to send the output of your EFX-chain back into it's input, in NORMAL mode, you control the the amount with only the FEEDBACK (Note: this pot works counterclockwise) pot, but in the ACTIVE (indicated by a ultraviolet LED) mode you get hands-on control of GAIN, FEEDBACK, PHASE, FREQUENCY MODE and of course final OUTPUT LEVEL (to tame the potentially destructively loud signal.). The 4x 6.3mm mono sockets on the back side of the pedal are from left to right (when pointing away from you): OUTPUT, RETURN, SEND, INPUT. When the TRUE BYPASS (indicated with a green LED) is engaged, your signal still goes through your EFX-chain in the loop. The Power input is for 'boss-style', center negative 2.1mm DC plugs, that are pretty standard for EFX-pedals it needs 9V DC (PSU not included). Build into a standard die-cast aluminum enclosure individually painted in the the burned out industry camo pattern in chrome and black. Handmade by GRM for METSÄÄN.

DEMO VIDEO follows. Stay detuned.

#metsään #metsäänmachines #ourborosautopoiesis
#thismachinekillsfascists #harshnoise #guitartone #tone #efxpedal #pedalboard #pedalworship #experimentalmusic #noisesynthesizer

I now have this board purring just how I want. The DOD Carcosa was the missing ingredient (it sounds huge with a lower octave added). Really enjoying all the recording choices and combinations I have now #pedalboard #jhs #DOD #thatpedalshow #guitars

The current little / spare board. Fuzz > OD > Trem > Delay/Reverb > multi Modulation. Covers most eventualities for me, except an Octaver to thicken the fuzz. #pedalboard #guitarpedals

Noise-feratu by Petr Valek

#pedalboard
#nosferatu

The new Ditto 2 #looper pedal from tc electronic they are showing at #NAMM2025 looks pretty interesting, but I'm going to wait for better demos than the show floor before I decide whether it's better for me than the Ditto+ that came out a couple of years ago, to upgrade my original Ditto (that I only use for practice and songwriting, never for performance). #bass #guitar #pedalboard

My answer to That Pedal Show's new "Compact Wet/Dry Rig Challenge":

Board is 380 x 280 mm to fit an airline underseat personal item (TheGigRig GenX14 power supply goes underneath). The Peterson StroboStomp HD tuner is separate from the #pedalboard, as is my preference.

DSM & Humboldt Electronics Simplfier X, Silver Linings, and Black Clouds; Digitech FreqOut and Nautila; Boss DD-8; TheGigRig Humdinger.

This can be used with two 1x12 combos and/or direct to PA, simultaneously.

Officially our first post here. Trying this out because… well… you know. Let’s see where this goes.
#guitarpedal #guitarpedals #stompbox #pedalboard #fuzzpedal #wrenandcuff

Milled a few test pedalboards today. Path prepared in FreeCad, which was less scary than I thought. Unfortunately the result is off by a few mm (approx bit size), still have to figure out what exactly went wrong.

Tableau de bord.
#pedalboard #punkrock #punkhardcore #thrashcore